Here is the pattern. This is half an A4 page (A5, I think). As you can see on the measuring tape that I put next to it, the fox is about 9 cm (3,5") big. I am sorry I cannot help with how you should print it out to have the right size, I don't have a printer at home so I cannot try it. But if someone can figure it out, please let me - and the other readers - know. On the other hand, it does not matter too much if the final size is a bit bigger or smaller.
If you are planning to make more than one, it is better to copy the pattern on a piece of cardboard, otherwise just normal printing paper works. I usually pin the pattern to the felt, and cut next to it, to avoid having to draw on the felt itself.
Cut the fox shape out of orange felt, you will need 2 pieces. Then cut the small details from white felt: two pieces for the face, one for the tummy and two for the tail.
I usually sew the face and the tail on with white thread, and very small running stitch. The tummy I often decorate with a tiny embroidery, then sew on with blanket stitch. On these examples I used orange thread, but sometimes I just use all kinds of colours. I often use small left-over thread pieces for these projects.
You don't need to sew the details all around, only those sides that will not be sewn with the final blanket stitch. Like this:
Finish the face: use black thread to embroider the eyes and the nose.
The back side of the fox only gets one detail: the tail.
Then sew the front and back together with small blanket stitch. It is good to start in the curve between the tail and the body, and sew the tail first, and stuff it as you go. It will be difficult to stuff it later. I usually stuff the tail really hard, otherwise it does not look very nice. I also add a cord on the top of the head, but that is optional.
Here is a picture of how I make them in an assembly-line.
I hope you like this tutorial. Let me know if something is not clear.
Happy stitching.
